![]() Finally, remember to feel like a kid again with a new Tonka truck, at least for a minute. If you can, wash it to avoid cleaning charges. It's not making money for anybody if it sits there. Once you've finished using the machine, call the rental shop right away to get it off your site. But this time you'll cover the trip and you won't save anything on downtime. If the breakdown is your fault, a company representative will come out, too. Note when the machine went down and when they got it working again ask the company to adjust your bill accordingly. If the problem is the company's fault, they should come out right away to fix it or deliver a new machine. If something like that happens, call your rental agent as soon as possible. Some problems, like a mechanical breakdown or flat tire, are unavoidable. If you're using the machine improperly and you break it, you're out of luck. It doesn't, however, cover you from neglect. The damage waiver (which costs about 12 percent of the rental fee) covers accidental damage to the equipment while it's in your care. A damage waiver from the rental company can give you some protection, too. Check your own insurance policy to be sure you're covered for using this kind of equipment on site. You and your operator should read and understand the operational instructions and the rental agreement. It's your employee's job to use the proper fuel drive with the bucket, forks, or arm as low as possible (especially on a hill) lock the machine at night grease fittings and/or wash the equipment down before it goes back. The operator should understand all the appropriate preventative maintenance (if any) and hold the keys until the work is done. ![]() ![]() Your operator should inspect the machine at delivery with the rental agent for damage before it even comes off the trailer. Doing wheelies in a Bobcat is fun, but whether you're excavating a row house basement or hauling materials around a new construction jobsite, people and property can get wrecked fast by a careless crew. Next, designate one of your crew members as the equipment operator. Before the machine shows up, have the local utility field rep mark your site to prevent piercing gas, electric, telephone, or cable lines. A good rental agent will tell you do's and don'ts for operating the machine effectively and safely. Furthermore, they should talk you though any machine you're inexperienced with. However, they should provide operators' manuals and additional printed safety and operational information. Some rental companies may not require you or your operator to take the class. Tipping is a real concern with aerial work platforms, so classes focus on maneuvering them, tilting, load points, operation on uneven ground, and checking the machine's blind spots. You can usually find someone to teach it right at the rental company classes take anywhere from four to eight hours and cost about $60. Contractors who rent aerial work platforms, including telescoping-boom forklifts, cherry pickers (boom lifts), and scissors lifts, often must take a safety certification class. ![]() However, when it comes to using manlifts and forklifts, you may need a certification class before the rental company will deliver equipment to your jobsite. All you need is a driver's license and major credit card and you can get that lot cleared, road cut, or those holes augered without much prep work. Luckily, you can rent almost anything from a 36-inch, walk-behind trencher to a 60,000-pound excavator. But you've probably needed a piece of burly, specialized equipment to keep your jobs on schedule or to complete them. Chances are you don't own a Bobcat, boom-lift, or backhoe and don't need to.
0 Comments
Leave a Reply. |